- A substance or mixture classified as hazardous and supplied in packaging must carry a label with the supplier's name, address and phone number, the nominal quantity, product identifiers, and where applicable hazard pictograms, a signal word, hazard statements, precautionary statements and supplemental information (CLP Article 17).
- Whether your candle or wax melt needs a CLP label depends on its classification, which comes from the fragrance's safety data sheet. Unscented candles usually only need fire safety information (Trading Standards and British Candlemakers Federation advice).
- The label must be in English, firmly fixed to the packaging that directly holds the product, and readable horizontally when the package is set down normally (CLP Articles 17 and 31).
- For packages up to 3 litres, the CLP information should, if possible, take up at least 52 × 74 mm, and each pictogram must be at least 1 cm² (CLP Annex I).
- Hazard pictograms are a black symbol on a white background in a red-framed diamond.
- Statements such as 'non-toxic' or 'non-harmful' that conflict with the classification aren't allowed on the label or packaging (CLP Article 25(4)).
- Candles must also be safe under the General Product Safety Regulations 2005; unsafe candles are recalled through the government's product safety notices.
Do scented candles and wax melts need a CLP label?
If the finished product is classified as hazardous, yes. Fragrance oils often contain substances that make a scented candle, wax melt or diffuser a classified mixture, so it needs a CLP hazard label. Unscented candles usually aren't classified, but still need fire safety information. Your fragrance supplier's safety data sheet gives the data to work it out.
| Product | General product safety | CLP hazard label | Candle fire safety warnings |
|---|---|---|---|
| Unscented candles | Yes | Usually not (not classified) | Yes |
| Scented candles | Yes | Yes, if the mixture is classified | Yes |
| Wax melts | Yes | Yes, if the mixture is classified | Not the candle warnings |
| Reed diffusers | Yes | Yes, if the mixture is classified | Not the candle warnings |
What must a CLP label on a candle contain?
The supplier's name, address and telephone number; the nominal quantity (unless shown elsewhere on the pack); the product identifiers; and, where they apply, hazard pictograms, a signal word, hazard statements, precautionary statements and supplemental information such as an allergen warning.
- Product identifier the product name, plus the identity of the substances that drive the classification (from your SDS).
- Nominal quantity unless it's specified elsewhere on the package.
- Batch number not a CLP element, but helps traceability and recalls (Trading Standards advice).
- Signal word and allergen statement for example 'Warning', with supplemental information naming sensitising substances where required.
- Hazard and precautionary statements the H and P statements that match the classification, plus any pictograms.
- Fire safety warnings the candle safety warnings and symbols, separate from CLP.
- Supplier details name, address and telephone number of the supplier.
The label elements must be clearly and indelibly marked, stand out from the background, and be big enough and spaced enough to read easily (CLP Article 31). That's a print question as much as a design one: ask for a material, ink and finish that won't rub off or smudge when the candle is handled or warm.
What size does a CLP label have to be?
For packages up to 3 litres, the area for the CLP information should, if possible, be at least 52 × 74 mm, and each pictogram at least 10 × 10 mm (if possible 16 × 16 mm). Each pictogram must cover at least one fifteenth of that minimum label area and be no smaller than 1 cm².
| Capacity of the package | Label area for the CLP information | Each pictogram |
|---|---|---|
| Not exceeding 3 litres | If possible, at least 52 × 74 mm | Not smaller than 10 × 10 mm; if possible, at least 16 × 16 mm |
| Over 3 litres, up to 50 litres | At least 74 × 105 mm | At least 23 × 23 mm |
| Over 50 litres, up to 500 litres | At least 105 × 148 mm | At least 32 × 32 mm |
| Over 500 litres | At least 148 × 210 mm | At least 46 × 46 mm |
Most candles and wax melts are in the first row. On a small tin or a clamshell of wax melts, 52 × 74 mm is a lot of space, and the rule says 'if possible'. Printers have ways to make room: a separate CLP label on the base, a wrap-around label, or a fold-out (peel-and-reveal) label. Pictograms are always a black symbol on a white background inside a red diamond frame wide enough to see clearly.
Where does the CLP label have to go on a candle?
Labels must be firmly fixed to one or more surfaces of the packaging that directly holds the product, and be readable horizontally when the package is set down normally. The candle's fire safety warnings sit separately from the CLP elements.
- Immediate packagingOn the jar, tin or clamshell itself, not only a sleeve or box that gets thrown away.
- Readable when set downText runs horizontally when the candle is standing normally.
- Base labelsFine if they're readable as the rule requires; check with Trading Standards if unsure.
- Online listingsTrading Standards advice says CLP hazard information also applies to advertisements, including product pages online.
Which fire safety warnings go on candle labels?
Candles are expected to carry fire safety warnings and symbols; the joint Trading Standards and British Candlemakers Federation advice points to BS EN 15494:2019, the standard for candle product safety labels. Candles must be safe under the General Product Safety Regulations 2005.
The joint advice lists three mandatory supplementary safety messages from BS EN 15494 for candles: never leave a burning candle unattended; keep away from things that can catch fire; keep away from children and pets, alongside the standard's safety symbols. Some candle types need more, such as a heat-resistant candleholder, and there are optional messages such as not burning in a draught or trimming the wick. The standard itself is sold by BSI, so check the current version or your trade association for the exact symbols and layout.
Unsafe candles are recalled: GOV.UK product safety notices include scented candles recalled because they could burn in an uncontrolled way and didn't meet the General Product Safety Regulations 2005 (example recall notice).
Which labels work on candle jars, tins and wax melts?
Candle labels meet warm glass, fragrance oil and handling. Ask for materials and adhesives that tolerate warmth and oils, with a laminate or varnish to protect the print, and test them on a burning candle before you order a full run.
Warm glass
Jar labels get warm as the candle burns; some adhesives soften. Test a burn cycle with samples.
Fragrance oil
Oils can mark paper and soften some adhesives. Film or laminated labels resist them better.
Tins and clamshells
Small curved or flat surfaces: shaped labels, base labels or wrap-arounds help fit the CLP area.
Premium look
Textured papers, foil and clear 'no-label look' films, checked for CLP legibility.
Batch codes
Leave a panel for batch numbers you print in-house, or ask about variable-data printing.
Many scents
One base design with a different CLP panel per fragrance: ask how the printer handles many versions in one order.
Get quotes for your labels
Tell us about the labels once. We pass your brief to a specialist UK label printer suited to your job, who will:
- Check the spec with you: size, material, adhesive, finish, roll or sheet, and how the labels will go on.
- Quote in writing for your quantity, with any set-up, plate or proof costs shown.
- Proof before printing, so you can check the artwork and the legal text.
For business orders. Prefer email? Write to [email protected] with your label size, quantity and what they're for.
Related guides
Candle labels and CLP: frequently asked questions
Do candles need CLP labels in the UK?
Scented candles, wax melts and diffusers need a CLP hazard label if the finished product is classified as hazardous, which often happens because of the fragrance. Unscented candles usually aren't classified but still need fire safety information. The classification comes from your fragrance supplier's safety data sheet.
What information goes on a CLP label?
The supplier's name, address and telephone number, the nominal quantity, the product identifiers and, where they apply, hazard pictograms, a signal word, hazard statements, precautionary statements and supplemental information (CLP Article 17).
What size does a CLP label need to be?
For packages up to 3 litres, the CLP information should, if possible, take up at least 52 × 74 mm, with each pictogram at least 10 × 10 mm (if possible 16 × 16 mm) and never smaller than 1 square centimetre.
Can I put the CLP label on the bottom of a candle?
The label must be firmly fixed to the packaging that directly contains the product and be readable horizontally when the package is set down normally. If you're unsure whether a base label meets this for your product, ask your local Trading Standards service.
Do wax melts need CLP labels?
If the wax melt is classified as hazardous, yes. The joint Trading Standards and British Candlemakers Federation advice says diffusers and wax melts contain fragrances, so the CLP requirements apply to them.
Can I say my candle is non-toxic?
Not on the label or packaging if it conflicts with the classification: CLP Article 25(4) prohibits statements such as 'non-toxic' or 'non-harmful' that indicate the product isn't hazardous or are inconsistent with its classification.
Does a label printer check my CLP wording?
No. The printer prints the label elements you supply. Classification and wording are the supplier's responsibility; use your fragrance supplier's safety data sheet, a specialist, or HSE's UK CLP helpdesk for questions.
What labels stick to candle jars?
Labels with an adhesive that tolerates warmth and fragrance oil, often on a film or laminated face material. Test samples through a full burn before ordering a run.
Sources
We checked the facts on this page against these sources on 18 November 2026. Rules change: check the current version before you sign off a label.
- Regulation (EC) No 1272/2008 (CLP), Article 17: general labelling rules (legislation.gov.uk)
- CLP Article 25: supplemental information, including the ban on 'non-toxic' statements (legislation.gov.uk)
- CLP Article 31: general rules for the application of labels (legislation.gov.uk)
- CLP Annex I, section 1.2.1: minimum label and pictogram sizes (legislation.gov.uk)
- CLP Annex II, section 2.8: EUH208 for mixtures containing a sensitising substance (legislation.gov.uk)
- The hazard label (Health and Safety Executive)
- Candlemakers advice pack, January 2024: joint advice from Cornwall Council Trading Standards and the British Candlemakers Federation (PDF)
- Product recall: scented candles presenting a risk of fire (GOV.UK, Product Safety Database notice)